Surface treatment and hot-deep galvanization
Flat products shotblasting and priming on automatic line
| Min/max thickness | 5 – 600 mm |
| Max width | up to 3200 mm |
| Min/max length | 3000 – 16000 mm |
| Min/max load per meter | 30 – 2000 kg/m |
| Types of protective primers from manufacturers | zinc silicate epoxy |
| Nominal protective primer coating thickness | 20+/- 5 ym |
| Crane lifting capacity | 16 t |
| Materials | carbon steel |
Profiles shotblasting and priming on automatic line
Profile shotblasting and priming on automatic line
| Overall dimensions | 2600 x 600 mm |
| Min./max. length | 2800 – 18000 mm |
| Min. plate thickness | 6 mm |
| Number of turbines | 6 |
| Capacity | 18.5 kW |
| Types of protective primers from manufacturers | zinc silicate epoxy |
| Nominal protective primer coating thickness | 20+/- 5 ym |
| Material | carbon steel |
PRE-HEATER VHP2500-4
| Entrance dimensions | 2600 x 600 mm |
| Max. recirculating air temperature | 300 °C |
| Heating capacity | 660 kW |
PRE FABRICATION PAINTING VP2500-4
| Entrance dimensions | 2600 x 600 mm |
| Min. / max. length | 2800 – 18000 mm |
| Min. plate thickness | 6 mm |
| Spray guns | 4 no. |
Hot-dip galvanizing
| Bath length | 13 m |
| Bath depth | 3 m |
| Bath width | 1.6 m |
| Coating thickness according to requirements | LST EN1461:2009 |
| Coating thickness (as agreed with the customer) | up to 400 ym |
| Crane lifting capacity | 12 t |
Certificates